
Low Water Pressure?
Need to boost your water pressure?
Water Authority byelaws prevent a pump being connected directly to the mains supply, so when mains supply pressure needs a boost a break tank must be incorporated into the system.
Our all in one box solution is designed to solve this problem providing a fully automatic submersible pump and tank unit able to boost pressure for cold water supplies, high pressure hot water systems or combi boilers.
100 litre tank with NKm2/1 single phase stainless steel pump supplied ready to install complete with pump controller prewired with 1m cable and fitted plug, fitted inlet valve (ballcock) and 2 litre potable expansion vessel.
The pump controller will prevent the pump running dry, should the tank empty, and has an inbuilt auto reset timer.
Tank size. 700mm x 500mm x 870mm approx.
(L x W x H external dimensions including Brio controller.)
Tank size. 700mm x 500mm x 960mm approx.
(L x W x H external dimensions including to top of vessel.)
Pump will produce 30 litres / min @ approx 3 Bar
40 litres / min @ approx 2.5 Bar
Click here for further NK pumps information
NO INSULATION available
PLEASE ALLOW UP TO 5 WORKING DAYS FOR DELIVERY
Click here to download Installation Instructions
TO DISCUSS YOUR REQUIREMENTS AND TO ORDER PLEASE CALL US ON 0845 130 3300
Price: £859.80 (Including VAT at 20%)
plus £61.27 delivery (Including VAT at 20%)
Comments
Posted On
Apr 10, 2010Posted By
Tim KerridgeWe run a guest house(see Website)3 gravity fed bathrooms in main house plus 1 power shawer & 1 gravity shower. We Have a cottage 10 mts from main house which has 1 gravity fed bath heated by imersion.Next to this cottage we have an 8.5kw shower room for a remote caravan. I want to instal a further electric shower in a remote building 40 mtrs from this cottage. Electric showers sometimes run cold during peak demand . will your 100 ltr pumped syatem solve my problem? Regards Tim Kerridge.
RSS feed for comments to this post.